Additional Information
The system used by our Pressovac series casting machines was specially developped for dental labs where casting perfection is absolute: casting pieces have a very smooth surface, a very dense molecular structure and without defects like unproper filling,porosity and shrinkage. Metal is inserted into the crucible and the flask positioned on the cradle inside the casting chamber.
ELECTRIC Electrical Singlephase 230 V – 50/60 Hz – 3,5 kW
CRUCIBLE VOLUME Crucible Volume 10 cc
DEGREE SIZE Flasks Ø min. 30 mm – Ø max. 90 mm h min. 55 – max. 90 mm
WORKING FREQUENCY Working frequency 70 kHz
MAX TEMPERATURE Max temperature 2.100 °C
OPTICAL CONTROL Optical Control Optical pyrometer infrared (± 2% – 5%)
VACUUM PUMP External Vacuum Pump With external vacuum pump 8m³/h – 0,005 mbar
WATER COOLING CAPACITY Water Cooling Supply ad acqua demineralizzata con resistività maggiore di 20K ohm/cm – 3 l/m – 3 bar con impianto di raffreddamento a circuito chiuso / demineralized water with resistivity over 20K ohm/cm – 2 liters/minute – 3 bar with system of cooling closed circuit
AIR PRESSURE Compressed Air Supply 6 – 8 bar
GASES Inert Gas Supply Helium, Argon, Nitrogen
DIMENSIONS Overall Dimensions base 600 x 500 mm – h mm 580 mm
WEIGHT Weight 90 kg
GUARANTEE Guarantee 12 months