Additional Information
The Galloni “G” series casting machines are the latest and most technically advanced induction heated vacuum “over pressure” machines currently available worldwide, featuring low frequency generators and fully proportional computer-controlled power output. The operator has simply to charge the crucible, place the casting flask in position and press one button! The G series is equipped with a 7” colour touch-screen All machines lead the operator logically step-by-step through the casting sequence, irrespective of the type and quantity of the alloy. Frequency and power output are automatically and continuously adjusted and, just ahead of attaining the preset casting temperature, the computerized control starts modulation of the heating current by delivering low frequency impulses, which inductively stirring the melt. Then, when all parameters are achieved and the temperature “spread” is no more that 4°C either side of the set point, pouring starts automatically followed by strong pressurization of the molten metal by inert gas. The complete cycle can be performed in 7 minutes!
ELECTRIC Electrical Trifase 230 V – 50/60 Hz – 6 kW Threephase 230 V – 50/60 Hz – 6 kW – A transformer is supplied for 400/415 V tension
CRUCIBLE VOLUME Crucible Volume 240 cc
DEGREE SIZE Flasks Ø min. 80 mm – Ø max. 150 mm h min. 80 mm – h max. 250 mm
WORKING FREQUENCY Working frequency 10 kHz MAK. ISI Max temperature 1150 °C “K” 1450 °C “S”
WATER COOLING CAPACITY Water Cooling Supply ad acqua, 3 l/m – 3 bar; 20 – 25 °C; Acqua demineralizzata con resistività maggiore di 20K ohm/cm / by water, 3 l/m – 3 bar; 20 – 25 °C; demineralized water with resistivity over 20K ohm/cm
AIR PRESSURE Compressed Air Supply 7 bar
GASES Inert Gas Supply Argon, Nitrogen, Helium
VACUUM PUMP External Vacuum Pump External vacuum pump 60 m³/h
DIMENSIONS Overall Dimensions base 600 x 650 mm – h 1200 mm
WEIGHT Weight 210 Kg
GUARANTEE Guarantee 12 months